CANjet / CANion – gravity can rinser

Description
The product is known for reliability of production Speed of up to 120.000 cph (2.000 cpm). The big Advantage is the simple, fast Change of can sizes. The changeover process is done in about 2 minutes - no Manual Change of parts is required.
- The empty cans are supplied by chain or air conveyors
- The cans are turned by the rinser head assemboy by 135 degrees and fed to the rinsing channel
- In the lower two thirds of the rinser channel, the cans are dripping off to achieve the required amount of residual water.
- In the air rinser, this segment can be used for an optional second blowing area.
- After the cleaning (rinsing) process, the cans are turned back by the twist block at the outlet (standing on the can bottom) and transferred to the conveyor system.
- The changeover of can Diameter and height is simple with a semi-pneumatic Panel at the lower end of the rinser.
- The changeover can be done in about 2 miuntes - please see our Video.
As filler, you profit from the multiple advantages of the gravity rinser CANjet / CANion:
Modular System
- Manual adjustment with pneumatics to adjust can diameter and height.
- As an alternative, a servo motoric adjustment (Patent) with automatic adjustment of can diameter and height can be retrofitted.
- Adjustment of block twists and rinser channel in about 1 to 2 minutes. There is no need to change any parts or even the rod twist.
- Optionally, the rinser can be equipped with a water tank to collect used water for following processes like cleaning cans on the outside.
- The rinser can simply be retrofitted for new can sizes.
Process and Products
Productrs | cans of all known diameters and heigth |
Material | tin or aluminum |
Can-Ø | 53 mm - 73 mm |
Can height | 89 mm – 193 mm |
Variants and Options
Water or ionized air as cleaning media | Retrofit for can height |
Pneumatic or servo motoric adjustment can be retrofitted | Retrofit for can diameter |
Water tank for used water | Pneumatic can stopper |
Safety switches for rinser channel covers | Spare parts set |
Technical Data
Production rate of up to 120.000 cans/h - 2.000 cpm |
Conveyor height |
Control |
Power requirements |
Main drive |
Air pressure |
Water connection |
Mechanical engineering
High-grade materials | Stainless Steel (1.4301 or 1.4571) food safe plastic (z.B. POM or PTFE) and Elastomer (z.B. EPDM) |
Protection class | IP54 |
Compact design (LxWxH in mm) | according to line layout |
Weight | 210 kg |